HYDRAULIKSYSTEM
Ring-free reamer - Explained
One of the most common problems when machining spool bore holes is that the bore by the rough pass reamer creates rings that get stuck in the component. The following manual removal of these rings prior to finishing/assembly is a time consuming and costly process.
Our patented process strategy and technology can help you eliminate the rings, thus resulting in considerable savings.
- Get rid of rings in the spool bore hole
- Avoid manually removal of the rings
- Save a lot of time and costs
Straight fluted reamer
The conventional method.
Here the risk of leaving rings inside the workpieces after machining is far bigger than the ring-free solution.
Ring-free reamer
Part of our self-developed 3-way process.
The ring-free reamer makes sure that all the rings are being removed and split into tiny chips, which are then flushed out of the workpiece.
Se våra verktyg jobba
Se vår egenutvecklade 3-stegslösning för att bearbeta spolhål snabbare och bibehållen hålkvalitet över tid. Vår lösning består av pilotborr, ringfri brotsch och verktyg för kambearbetning.