AEROSPACE
BLISK
We can supply you with numerous variations of standard and custom-made tools for working in tough materials like titanium, inconel etc.
Below you will see a small selection. If you do not find what you are looking for take a look in the brochure or contact us and we will help you find the right tools.
SG, PG, MU CHIPBREAKER (PR1535, SW05)
Roughing (internal and external, face)
SG:
- Stable chip control during heavy machining applications
- High-strength land and low cutting force design
- Double-sided 4-corner design
PG:
- Stable chip control
- Great cutting edge stability
- Suitable for medium roughing
- Prevents the formation of shavings and the possibility of chip biting
MU:
- From medium to roughing
- Large rake angle
- Low cutting resistance
- Reduces notching & burrs
MQ, SK CHIPBREAKER (PR1535, SW05)
Roughing (internal and external, face)
MQ:
- From finishing to medium
- Large rake angle with circular edge line
- Low cutting force and good chip control
- Stable chip evacuation due to large slits and rake angle
SK:
- Stable chip evacuation due to large slits and rake angle
- Increased chip control in small depth of cut due to new chipbreaker design
- Lower cutting force as the cutting blade is lowered towards the center of the workpiece
- Improved wear resistance with MEGACOAT NANO (PR1535) coating
4/5/6RFH - ROUGHING ENDMILL
Solid carbide radial tangent finishing cutter.
- Slot roughing (Ø6 - 20)
- High efficiency machining with multi-edge design
- Good chip evacuation with serrated edge
- Stable machining with reduced cutting pressure
NTS-NI END MILL
Solid carbide semi-finishing and finishing.
Your reliable cutter for dynamic machining nickel alloys and HRSA in general.
- Corner radius/chamfer, cutting length, chip divider, neck reduction, oversize shank
- Variable helix configuration for stable machining and 100% reliability
- Dual fluting for efficient chip evacuation
- Optimised cutting edge geometry for burr free machining
- Sharp and ultra strong cutting edges insure low cutting force that result in longer tool life and less tool costs
- New coating is proven as the top performing solution for nickel based super-alloys
NTS-RADIAL - BARREL TOOL
Solid carbide radial tangent finishing cutter for high-speed finishing on 5-axis machines
- 1st choice for tangential finishing of hard- to-reach surfaces
- The faster alternative to ball-nose copy milling
- The shape produces lower cusp height than ball nose tools, which enables larger stepover length
- ±5 μm profile tolerance on effective radius
- Tough, sub-μm grain, chip resistant carbide with Kyocera PVD coating
- We customise the tools in this semi-standard range to meet your individual needs